Blackberry MEP Reader - No USB cable required
1- Power phone ON
2- Hold down the ALT CAPS H (all together), or hold down the ALT (bottom
left) and type EACE then release the ALT
For Storm 9500,9530,9550, hold the BACK arrow, and tap the screen in the
following areas: TOP LEFT, TOP RIGHT, TOP LEFT, TOP RIGHT.
3- You will enter in to the HELP ME screen
4- Please copy the following information exactly as they appear on the
phone
5- PIN , Pin must be entered all in lower case letters, 30e0ee0d
6- App Version, App Version Exactly with the dots, space and brakets, as it
appears 4.7.1.61 (124)
There is always a space between the last number of the APP version, in this
case 61 and the first bracket. This very important.
7- Up time, Uptime only enter the numbers
8- You must remain at the HELP ME screen
9- Go to the following link
http://www.webalice.it/zibri/escr.html
10- Enter the PIN , App Version, and Uptime exactly as they are in the
fields
11- Make sure there are NO leading spaces after any field you fill up
12- The key will appear
13- On the HELP ME screen , type in the key given. NOTHING will appear on
the screen when you type in the key. Just use the dial pad to enter the key
given.
14- For example, if your key is 4FE15B47, Hold down the ALT key for every
number you enter, and do NOT press the ALT for the letters. So type ALT 4,
release the ALT key, then enter FE, hold ALT dial 15, release the ALT ... The
ALT key must be held down while dialing in a number
15- You will then enter the Engineering Menu
16- Scroll down and select OS Engineering Screen
17- Scroll down and select Device Information
18- Scroll down and you will find the MEP-xxxxx-xxx
19- Please provide the MEP exactly as it
appears
20- We will use this MEP to calculate the
unlock code.
